Mã Sản Phẩm: 083BP - 1SB - PAINT SPRAY & SOLVENTS (VN)
| Thermoplastic hose for high pressure paint spray and solvent applications from 115 to 360 bar (1600 to 5200 psi) |
 |
     
| 083BP - 1SB - PAINT SPRAY & SOLVENTS |
| |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
| part no. |
hose size |
ID |
OD |
WP |
BP |
safety factor |
bend radius |
weight |
ferrule part no. |
quantity |
| dash |
inch |
DN |
mm |
inch |
mm |
inch |
bar |
psi |
bar |
psi |
mm |
inch |
g/m |
lbs/ft |
standard |
A316L |
m |
| 0831BP |
-3 |
3/16 |
DN5 |
5,00 |
0,197 |
9,70 |
0,382 |
360 |
5.200 |
1.440 |
20.800 |
4:1 |
30 |
1,18 |
120 |
0,081 |
SAB111 |
SAB811 |
N/A
|
| 0832BP |
-4 |
1/4 |
DN6 |
6,50 |
0,256 |
11,70 |
0,461 |
310 |
4.500 |
1.240 |
18.000 |
4:1 |
40 |
1,57 |
155 |
0,104 |
SAB121 |
SAB821 |
1.800 |
| 0834BP |
-6 |
3/8 |
DN10 |
9,80 |
0,386 |
15,50 |
0,610 |
225 |
3.200 |
900 |
12.800 |
4:1 |
65 |
2,56 |
230 |
0,155 |
SAB141 |
SAB841 |
2.635 |
| 0835BP |
-8 |
1/2 |
DN12 |
13,00 |
0,512 |
18,80 |
0,740 |
190 |
2.700 |
760 |
10.800 |
4:1 |
85 |
3,35 |
295 |
0,198 |
SAB151 |
SAB851 |
273 |
| 0837BP |
-12 |
3/4 |
DN20 |
19,50 |
0,768 |
25,80 |
1,016 |
115 |
1.600 |
460 |
6.400 |
4:1 |
145 |
5,71 |
425 |
0,286 |
SAB171 |
SAB871 |
620 |
|
INNER TUBE
Polyamide PA6
REINFORCEMENT
One braid of steel wire
COVER
Polyurethane - blue - non pinpricked - black ink-jet branding
APPLICATIONS
Airless paint spray systems requiring additional mechanical strength of hose and/or electrical conductivity - Applications requiring high chemical resistance to solvents and aggressive fluids
FEATURES
Polyamide type 6 tube construction - Steel braid for high pressure requirements and increased mechanical properties increasing lifetime of the hose - Conductive - Blue cover
TEMPERATURE RANGE
-40 °C to +100 °C (-40 °F to +212 °F) limited to +70 °C (+158 °F) for air and water based fluids
DESCRIPTION
High pressure hose with blue cover particularly designed for paint spray and solvent applications with increased resistanceto abrasion mechanical strength and providing electrical conductivity.
|
WARNING
|
These hoses have a special branding that indicates burst pressure only because these hoses can be used in applications not following the traditional 4:1 safety factors as recommended for general high pressure hoses.
Burst pressure for reference only - use maximum working pressure in accordance with application safety factor.
It is the user's responsibility however to respect a sufficient pressure safety margin for the application to guarantee safe working conditions.
|