Danh Mục Sản Phẩm

031 - PTFE 1SSB CONVOLUTED (VN)

THÔNG TIN SẢN PHẨM
THÔNG SỐ KỸ THUẬT
TẢI VỀ
PHỤ KIỆN

Mã Sản Phẩm: 031 - PTFE 1SSB CONVOLUTED (VN)

Convoluted PTFE hose for medium pressure from 23 up to 138 bar (from 300 to 2000 psi)

src= src=

part no.	dash	inch	DN	mm	inch	mm	inch	mm	inch	bar	psi	bar	psi	safety factor	mm	inch	g/m	lbs/ft	standard	A316L	m
031 - PTFE - 1SSB CONVOLUTED

part no.	hose size			ID		tube thickness		OD		WP		BP		safety factor	bend radius		weight		ferrule part no.		quantity
0314	-6	3/8	DN10	9,50	0,374	-	-	15,20	0,598	138	2000	414	6000	3:1	20	0,79	210	0,141	SAI141	SAI841	166
0315	-8	1/2	DN12	12,80	0,504	-	-	18,80	0,740	103	1400	309	4200	3:1	25	0,98	280	0,188	SAI151	SAI851	198
0316	-10	5/8	DN16	15,90	0,626	-	-	22,10	0,870	83	1200	249	3600	3:1	50	1,97	325	0,218	SAI161	SAI861	149
0317	-12	3/4	DN20	19,00	0,748	-	-	24,60	0,969	69	1000	207	3000	3:1	65	2,56	395	0,265	SAI171	SAI871	141
0318	-16	1	DN25	25,40	1,000	-	-	32,80	1,291	46	600	138	1800	3:1	90	3,54	550	0,370	SAI181	SAI881	211
0319	-20	1+1/4	DN32	32,20	1,268	-	-	40,70	1,602	34	400	102	1200	3:1	125	4,92	690	0,464	SAI191	SAI891	90
031T	-24	1+1/2	DN38	38,10	1,500	-	-	48,20	1,898	30	400	90	1200	3:1	150	5,91	890	0,598	SAI1T1	SAI8T1	N/A
031X	-32	2	DN51	51,40	2,024	-	-	61,50	2,421	23	300	69	900	3:1	200	7,87	1240	0,833	SAI1X1	SAI8X1	49

CLICK VÀO ĐÂY ĐỂ NHẬN ĐƯỢC SỰ HỖ TRỢ VÀ TƯ VẤN KỸ THUẬT

INNER TUBE

Polytetrafluoroethylene

REINFORCEMENT

One braid of stainless AISI 304 wire

COVER

N/A

APPLICATIONS

Aggressive chemicals transfer systems - Compressed air and gases - High or low temperature fluid or gas transfer

FEATURES

Pure PTFE tube material: lightweight resistant to almost all chemicals gases and solvents. Stainless steel braid / cover to support medium pressure requirements. Hose comes in random length coils

TEMPERATURE RANGE

-60 °C to +260 °C (-76 °F to +500 °F)

DESCRIPTION

Lightweight convoluted hose for standard industrial use especially for high or low temperature and aggressive chemical applications: including some gases (there will be a level of gas permeation which should be taken into account). Care should be taken to ensure proper fitting and ferrule compatibility - we recommend to contact our sales office for fittings selection. Hose not suitable for continuous hydraulic impulse applications. Above 130 °C ( 266 °F) there will be a reduction in maximum working pressure: reduce maximum working pressure by 1% for each 2 °C (3.6 °F) above 130 °C ( 266 °F). Hose suitability must be checked when discharge of electrical static build up is required.